DL1 Pro Options - Race Technology Ltd - Automotive Technical Excellence

DL1 PRO Options:

	20Hz GPS Increased speed and position accuracy, with higher GPS resolution. Download corrections from the internet with advanced PPP mode. The 20Hz GPS option for the DL1 is quite simply the best and most accurate available of any competitor data logging system. The GPS makes a unique calculation of position and speed 20 times a second with no interpolation or other "tricks". The unique GPS technology has been developed in house by our engineers and tested in the most challenging racing environments - the accuracy is nothing short of a break though at this price point and in this respect there really isn't any competition.
	6g Accelerometers 6g accelerometers are recommended for applications that use large aerodynamic aids.
	QuickSync - Automatic GoPro Video and DL1 Data Synchronisation Synchronised DL1 data with automatically synchronised GoPro video. QuickSync software licence enables HD video by data analysis, and data overlaid video exports from the Analysis software. QuickSync technology uses GPS data from GoPro and Race Technology data files to automatically align data. For further information click here. *GoPro camera not included.
	Low Side Drivers and 4 Extra Analogue Channels Low side output drivers and 4 extra analogue inputs is the option you will require if you want to switch on/off external systems automatically using your DL1. This control can be simple or based on a complicated custom equation between various channel data. This option also enables the 4 additional analogue channels, making a total of 12.
	High Accuracy Export If you intend to use your data in an external application (not just the analysis software) you will need an export licence to output the 20Hz data at full accuracy. The licence enables increased output resolution on GPS latitude, longitude, raw velocity, position, heading, gradient, speed and distance.
	2nd Serial Port A second serial port is ideal for combining multiple input and output modules for complex systems, or driving a low speed telemetry channel on one port and a high speed output for video overlay on the second. A breakout cable is supplied with this option to enable easy connection of the separate serial ports. Serial port 2 is for receiving data only, serial port 1 can both transmit and receive data.
	Built-in ECU Interface The DL1 CLUB, PRO, and WP can be used to decode serial data directly from an ECU without the need for a separate interface cable. This feature allows a simpler, neater installation, and allows the decoding of more channels than with a separate interface. Enable and disable any channels for a completely bespoke set up, logging as much or as little data as is required. Record raw serial data at 4800, 9600 and 115200 baud rates, which can be useful for fault diagnosis and development. Information on compatible ECUs and available channels is available on our Knowledge base here
	CAN Communication CAN reception (15 channel license): With this option the unit can decode any CAN data from either the vehicles main CAN stream or CAN based aftermarket ECU. This data can be mapped to any RT channels for saving or sending to serial port. Up to 105 CAN receive channels per unit, in multiples of 15 (one £100 licence gets you 15 channels). Messages loadable using .dbc files. Data rates of up to 1Mbit and 11 or 29 bit addressing. For more information visit our knowledgebase here. CAN transmission: With this option the unit can transmit any of the internal data channels on the CAN bus at a rate determined by the configuration. A .DBC file is provided with the default channel data and decoding information to make use with third party CAN reception systems much easier. Data for transmission on the CAN bus could be from the internal sensors (GPS, accelerometer, analogue channels, etc.) or from the serial input from an ECU interface or other unit attached to the serial port. The transmission rate for each channel can be individually configured at rates of up to 100Hz. Transmission can use 29bit or 11bit addressing at a number of different baud rates. CAN transmit and receive can both be specified on the same port. Each port must run at the same baud rate, if separate rates are required we advise using the second CAN port for this.
	RAW CAN reception Receive and log the vehicle's entire CAN bus data, irrespective of whether it is 11 bit or 29 bit address. Decode it in the Analysis software using DBC files. No need to pre-configure the data logger, just log and decode easily in the software. Perfect for reverse engineering CAN data and using on multiple vehicles. If used with the 1000Hz logging option it can log raw CAN at up to 1000Hz.
	Second CAN port Add a second CAN port to transmit or receive more CAN data. Receive CAN data from another source, ideal for integrating external equipment with a CAN output and synchronising it with the rest of the data.
	PWM Output Controller + Advanced Frequency Input The PWM (Pulse Width Modulation) output controller allows the unit to control an external system with a graduated signal. Meaning it can be "on" anywhere between 1 and 100%. This is ideal for water injection systems etc. This option also enables the advanced frequency inputs, enabling: Pulse counting, pulse high time, pulse low time, pulse position, duty cycle and mark space ratio. For more information please visit here
	DL1 PRO/WP - 100Hz Live Speed Enhancement The DL1 PRO and WP models are available with optional output of live speed. This option takes the data from the GPS system and the built in accelerometers and combines them using a kalman filter to provide a real time output of speed with is updated at up to 100Hz and which is resistant to brief GPS outages such as bridges or buildings. More information is available here
	DL1 PRO/WP - 1000Hz Data Logging Enhancement Measure rapid changes with the 1000Hz sample rate on sensor channels. Essential for accurate suspension analysis, where the high sample rates allow calculation of shock rates as well as measurement of suspension position. If used with the raw CAN option it enables logging of CAN channels at up to 1000Hz.
	Configuration Lock The DL1 CLUB and DL1 PRO are extensively used as scrutineering loggers, monitoring vehicles in race series to prevent any foul play and to enforce the rules of the series. In these applications it is often preferable to lock the configuration on the units to prevent any of the settings and configuration from being read or changed by unauthorised individuals. Locking and unlocking the units is possible but only by the authorised person with the "Keys".