DL1 SPORT
Technical Specification
Memory | Compact flash type I. Formatted as FAT/FAT16 or FAT32 |
GPS | Outputs position, speed, position accuracy and speed accuracy every 200ms with no interpolation. GPS tracking loops optimised for applications up to about 4g. tracking of all satellites in view. |
GPS Antenna | Magnetic base, 3.3v active antenna with SMA connector. |
Analog Inputs | 8 external inputs, all 12 bit resolution and 0-12v. All inputs are protected to twice maximum input voltage. |
Lap Beacon Input | Triggering voltage requires a low input of <1v and a high input of >4v and 15v maximum. |
Start Sample Input | Input requires grounding to start sampling and again to stop sampling. |
GoPro control output | Pulls low at start and end of logging to trigger a GoPro camera to start/stop recording. |
Power Supply Requirements | 12v nominal input, minimum of 10v, maximum of 15v. Current consumption of about 180mA including GPS, dependant on compact flash card size +5v Reference Out Maximum current draw 100mA, tolerance 1%. |
Ignition In Signal (High Level) | Triggered by fast voltage transients. Can be connected directly to the low tension side of the ignition coil. |
Ignition In Signal (Low Level) | Triggering voltage requires a low input of <1v and a high input of >4v and 15v maximum. Suitable for connection directly to most ECU tacho outputs. Maximum input frequency >300Hz. |
Case Construction | Injection moulded plastic |
Connector Type | 3.5mm pitch lever connectors, wire sizes 16-28AWG, 0.32-1.3mm diameter. |
Serial Ports | Outputs sensor data for display on DASH unit.. Also used for re flashing, diagnostics and configuration. Also used to connect to an ECU adapter for logging additional data. |
Accelerometers | 3 axis, precision digital output. Guaranteed 2g minimum full scale on both axes. Resolution of 0.005g. Optional 6g sensor available as a factory option. |
Vibration | Factory tested at 25g, 50Hz sinusoid for 5 minutes (without compact flash card inserted). |
Temperature | Factory tested from -20oC to 70oC |
Dimensions | 123mm wide, 70mm deep (excluding rear connectors), 34mm high |